Planetary Gears, Autohelm 4000, ST4000 Wheelpilot 2mm shaft

SKU AH4000-PG
US$44
In stock
1
Product Details
Planetary gears for the Autohelm 4000 and ST4000 motor gearbox (part 4 in the parts diagram above) 3D printed in durable, smooth, nylon plastic. The gearbox contains a total of 22 gears. Choose either the 11 gear partial set or the complete 22 gear set, depending on how many you need to replace.

Optionally, add the precision cut spacer shim set - 7 large (24.5mmx13mm) for between each gear carrier and 1 small (16x9mm) for the main shaft (see exploded view picture).

These gears are for the Mark I BLACK wheel Autohelm 4000 and ST4000 - they DO NOT fit the Grey MK2 wheel. Find the MK2 gears here.


If your motor drive unit has Raytheon printed on it, then you likely need the 2.5mm shafts.

See here: 2.5mm Shaft Raytheon Gears


Download the installation instructions for the gears here.

Save this product for later

© 2016 by i3DGear.com  ( i3DGear.com is a division of Wallace Group Ltd.) | Salt Spring Island, BC, Canada